How to reset the Wiser Motion Sensor

Removing the Motion Sensor will automatically reset the device. Within the Wiser Home app, you can remove the sensor from the Wiser system by following the steps below:

1. On the Home screen, tap .

2. Tap Devices > Motion Sensor > Delete.

   TIP: Additionally, you can remove the sensor from the Wiser system by tapping on the Control tab Motion Sensor > Device settings > Delete..

3. Read the confirmation message and tap Ok to remove the sensor from the Wiser system.

   NOTE: Removing the sensor will reset the sensor. After resetting, the LED blinks amber indicating that the sensor is ready for pairing.

Alternatively, you can reset the sensor to factory default manually. To reset the sensor:

1. Rotate the sensor counterclockwise to unlock it from the base plate. Remove the device from the base plate to access the function key.

2. Short-press the function key three times (<0.5 s) and then long-press the function key once (>10 s); the LED blinks red after 10 s, then release the function key. Upon successful reset of the sensor, the LED stops blinking. The sensor restarts and blinks green for a few seconds.

   NOTE:  After reset, the LED turns off to save the battery.

To view the guide with visual aid please click here: Wiser Motion Sensor | Resetting the device.