How to install Wiser – Water Leakage Sensor

The Wiser Water Leakage Sensor is a crucial component of Schneider Electric's Wiser 2nd Generation smart home system, designed to detect water leaks promptly and prevent potential water damage in your home. This article outlines its purpose, functionality, and installation process to help you integrate it seamlessly into your smart home setup.

1. For What Purpose?

The primary function of the Wiser Water Leakage Sensor is to provide early detection of water leaks, allowing homeowners to take immediate action and mitigate potential damage. By integrating this sensor into your home, you can:

• Prevent Water Damage: Receive instant alerts when a leak is detected, enabling swift action to address the issue and minimize damage to your property.
• Enhance Home Safety: Monitor areas prone to leaks, such as under sinks, near washing machines, or water heaters, ensuring a safer living environment.
• Automate Responses: Integrate the sensor with other smart devices to trigger automated actions, such as shutting off water valves or turning off appliances when a leak is detected.

2. How Does It Work

The Wiser Water Leakage Sensor operates using the following mechanisms:

• Sensing Pads: Equipped with two sensing pads at the bottom, the sensor activates when water is present between these pads, indicating a leak.
• Audible Alarm: Upon detecting water, the sensor emits a beep alarm to alert occupants immediately.
• Wireless Communication: Utilizes Zigbee protocol to connect with the Wiser Hub, enabling real-time notifications and integration with other smart devices through the Wiser Home app.

3. How to Install It?

Installing the Wiser Water Leakage Sensor involves the following steps:

• Unpack the Device: Ensure all components are present, including the sensor, batteries, and user manual.
• Select Installation Location: Choose appropriate locations where water leaks are likely to occur, such as under sinks, near washing machines, dishwashers, or water heaters. Avoid areas where the sensor may be accidentally moved or kicked.
• Install Batteries:
  1. Use a screwdriver to remove the battery cover by unscrewing the six
     screws.
  2. Insert the batteries, ensuring correct polarity.
  3. Secure the battery cover back in place and tighten the screws.
  4. The LED will blink green seven times, indicating the sensor is powered on.
• Place the Sensor: Position the sensor flat on the floor at the chosen location, ensuring the sensing pads are in contact with the surface.
• Pair with the Wiser Hub:
  1. Open the Wiser Home app and navigate to the device pairing section.
  2. Press the function key on the sensor three times within 1.5 seconds; the LED will blink orange, indicating it is in pairing mode.
  3. In the app, confirm that the LED is flashing orange and tap 'Start Configuration.'
  4. Wait for the app to confirm successful pairing; a solid green LED on the sensor indicates successful pairing.
• Configure Settings: After pairing, customize the sensor's settings through the Wiser Home app:
  1. Renaming the Device: Assign a unique name to the sensor for easy identification, such as "Kitchen Sink Sensor" or "Laundry Room Sensor."
  2. Setting the Device Location: Specify the room or area where the sensor is installed to organize your devices within the app.
  3. Creating Automations: Set up automation scenarios, such as receiving notifications or triggering other smart devices when a leak is detected.

For comprehensive instructions and visual aids, refer to the Wiser Water Leakage Sensor Device User Guide.
By following these steps, you can effectively install and integrate the Wiser Water Leakage Sensor into your Wiser 2nd Generation system, enhancing your home's safety and providing peace of mind.