Wiser Motion Sensor LED behaviour guide Follow
Initial Stage
Action |
Status |
Green LED blinks 7 times |
After the sensor is powered On for the first time or after the batteries were replaced. |
If not paired yet
Action |
Status |
Amber LED blinks |
Indicates the pairing mode after function key is pressed 3 times within 1 second. If pairing is not successful, the amber LED is On for 3 seconds and then turns Off. |
Green LED is On for 3 seconds |
Pairing was successful. |
If already paired
Action |
Status |
Green LED blinks 5 times |
The sensor is paired and connected. |
An Amber LED blinks for three seconds |
The sensor is paired, but disconnected. |
Reset
Action |
LED Indication |
| After pressing the function key 3 times within 0.5 seconds and then hold for 10 seconds | The Red LED blinks for 10 seconds, remains on for 3 seconds, and then turns off. The sensor then restarts and blinks green for a few seconds. |
Battery level
| LED Indication | Status |
LED blinks Amber once per minute. |
The battery is low (< 10 %), replace the battery.
NOTE: A notification pop-up will appear on the app.
|
Identifying the device
| LED Indication | Status |
LED blinks Green . |
Sensor is connected to the Wiser Hub.
NOTE: This function is initiated from the app to identify the sensor.
|