Wiser Water Leakage Sensor LED behaviour guide. Follow
Pairing
User Action |
LED Indication |
Status |
Press the function key 3 times |
LED blinks amber, once per second. |
Pairing mode is active for 30 seconds. When pairing is completed, LED glows green for some time before turning Off. |
Resetting
User Action |
LED Indication |
Status |
Press the function key 3 times and hold it down once for > 10 s. |
After 10 s, the LED starts blinking red. |
The sensor is in reset mode. It is reset to the factory settings after 10 seconds. The sensor then restarts and the LED starts blinks green before turning Off. |
Battery level
| LED Indication | Status |
LED blinks amber once per minute with a beep sound. |
The battery is low (< 10 %), replace the battery.
NOTE: A notification pop-up will appear on the app.
|
Identifying the device
| LED Indication | Status |
LED blinks green. |
Sensor is connected to the Wiser Hub.
NOTE: This function is initiated from the app to identify the sensor.
|
To view the full guide please click here.