Wiser 2nd Generation Climate Control

When a Climate Device is assigned to a Room, a single Climate is created which includes all the climate devices assigned to that room.

The Climate Control looks and acts like a Device Control. You can control the Climate Control directly from the Home Screen and assign it to Moments or Schedules.

• All Climate Devices assigned to a Room will be combined as one Climate Control.
• The Climate Control cannot be named unlike other devices, but will take the name of the Room.
• Individual Climate Devices can not be assigned to a Schedule or Moment. Instead, the Climate Control will show up in the relevant lists.
• Operating a single device of the Climate Control manually (e.g. one of three Radiator Thermostats) will send the command to the Climate Control, affecting all assigned Devices. (All three Radiator Thermostats will open/close based on the command).
• Individual Devices can be locked against manual operation.
• To remove a Climate Device from a Climate Control, remove the Climate Device from the Room.

A	Boost Mode
B	Target Temperature
C	Status Icon Heating Icon:  Cooling Icon:
D	Measured temperature in the Room
E	Slider to set target temperature
F	If the Climate Control is assigned to a Schedule, you can choose whether the Climate Control should follow the Schedule.
G	Lets you edit an existing Schedule. TIP: If the Climate Control is not assigned to a Schedule, the option Create or assign a schedule will be available.
H	Navigate to the Room Details of the room to which the climate control is assigned.